Madjackal 0 Posted November 11, 2005 I know about offset but what is PCD and will 112 fit my 95 VR6. Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted November 11, 2005 the vr6 is 5x100 pcd 112 is from audi and the newer vw models PCD stands for 'pitch circle diametre' and is the diametre of a circle drawn through the centre of your wheel's bolt holes. P.C.D. is measured in millimeters and also indicates the number of studs or bolts the wheel will have. Volkswagen Alloy Wheels are usually either 4x100 [i.e. 4 bolt holes drilled through the centre of an imaginary 100mm circle] or 5x100 [VR6s, GTis and MK4s] Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted November 11, 2005 http://www.tyresave.co.uk/choose.html check out section 5 Quote Share this post Link to post Share on other sites
Madjackal 0 Posted November 11, 2005 So 112 is defo no good then? Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted November 11, 2005 nope no good http://the-corrado.net/.archive/forum/viewtopic.php?t=32592 you could try pm'ing kev to be sure :wink: Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted November 11, 2005 http://the-corrado.net/.archive/forum/viewtopic.php?t=32592 dont know if the same applies to your wheels though Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted November 11, 2005 waaaaaaaaaaaaaaaaayyyyyyyyyyyyy tttttooooooooooooooooo lllllaaaaatttttteeeeeeeee dazzyvr6, Quote Share this post Link to post Share on other sites
Supercharged 2 Posted November 11, 2005 You can buy hubcentric spacers to go from 5by112 to 5by100 but the offset of the wheels would need to be ET60 Quote Share this post Link to post Share on other sites
