**Ian** 0 Posted December 14, 2005 Can anyone tell me what colour wires go on these two, also how many wires go onto the coil and what colour they are :) also what colour the wires are that go on either side of the starter motor and also what wire connects to the temp sensor :) I know its a lot to ask but any help would be appreciated, if anyone fancies taking a few close ups of there G60 engine from a few different angles that would be great :D Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted December 14, 2005 Coil=green wire+black or black/red on older '89 G60s,those are the oil press. switch and oil temp.switch,black switch=yellow wire,smaller temp. sender=black/green wire,green/black wire=brown 0.3bar switch,i hope that make's sense. Quote Share this post Link to post Share on other sites
Walesy 0 Posted December 14, 2005 Pics..dunno if they're close up enough? Quote Share this post Link to post Share on other sites
**Ian** 0 Posted December 14, 2005 cheers lads :D Quote Share this post Link to post Share on other sites
**Ian** 0 Posted December 14, 2005 Also I know that on one side of the starter motor is a red/black wire but what goes on the other side and what colour is the wire on the temp sender, is it blue/black :? sorry for so many questions but the loom I have just fitted was a little bit ragged about :wink: Quote Share this post Link to post Share on other sites
