Ka` 0 Posted December 22, 2005 Hi, I am currently outside butchering the car, and I can't get the ECU connector off the unit so that I could swap it with another one. Can someone please tell me whether it's supposed slide, lift, what? And what's the best way of doing the aforementioned motion *ooer* Cheers, Rica Share this post Link to post Share on other sites
Blue_Joe 0 Posted December 22, 2005 I believe from memory is is a squeeze and pull action!!!! :oops: Share this post Link to post Share on other sites
Trig 0 Posted December 22, 2005 There should be something that slides out of where its connected (it's locked in place), then you just pull it off... Share this post Link to post Share on other sites
Ka` 0 Posted December 22, 2005 Cheers for the answers so far, Is anyone able to provide a quick pic? Cheers, Rica Share this post Link to post Share on other sites
Ka` 0 Posted December 22, 2005 Thanks all, This can be locked, if threads are locked in Engine Bay. I figured out where I am supposed to pull as per triggermyson, the brittle plastic broke! With some ingenuinety and needle nose pliers, I managed to get the tabs pulled and the connector popped out. Now to replace the tabs at some point. Cheers, Rica Share this post Link to post Share on other sites
Henny 0 Posted December 22, 2005 8) Locksville for this thread then... Share this post Link to post Share on other sites
