STORM 2 0 Posted January 21, 2006 OK forgive the ignorance, but is it possible to run a pair of speakers AND a sub from a bridgeable 2 channel amp? Quote Share this post Link to post Share on other sites
Blue_Joe 0 Posted January 21, 2006 Really you should run either one or the other! I think you can get away with it but not advisable! Quote Share this post Link to post Share on other sites
_Monkey 0 Posted January 21, 2006 Don't do it!!! The only way you could do that is to run the sub using full frequencies (i.e. NOT low pass) which subs REALLY don't like. Not to mention the amp might not like being loaded down, so you could end up popping both your amp AND your sub! Quote Share this post Link to post Share on other sites
mrbeige 0 Posted January 21, 2006 As above, its not advisable, but if you have a tri-mode amplifier (not as com now) it is possible, with the use of a low pass filter (simple inductor) for the sub and two high pass filters (capacitors) for the full range speakers. With the filters in place you shouldn't overload the amp too much as long as the choice of filters is correct. Quote Share this post Link to post Share on other sites
