billinjah 0 Posted April 30, 2006 any tips on a good supplier for some hyd followers for my g60? also cam belt and tensioner Quote Share this post Link to post Share on other sites
Blue_Joe 0 Posted April 30, 2006 Best cam belt is the VAG original - made by Powergrip Shrick do followers for the G60 - can get tehm from Bartek in germany! Quote Share this post Link to post Share on other sites
billinjah 0 Posted April 30, 2006 cheers mate these ones i assume shrick followers are they gonna be any better i guess they are only 30 euros more than std items. do gsf supply the powergrip belt is that a gates belt? Quote Share this post Link to post Share on other sites
Furkz 0 Posted April 30, 2006 bill speak to daz he has a good selection of high quality belts. Quote Share this post Link to post Share on other sites
Blue_Joe 0 Posted April 30, 2006 No GSF only do the bosch ones. You need to go to the VAG main dealer for the belt. It is apparently the best you can get and yes it is made by gates. I was recommended using it on mine and we know what that has had done. Best thing is from teh dealers they are only about £15. When it comes to the followers - in all honesty I again was recommended (by Darren included!) that the standard G60 followers are more than adequate for any cam and you don;t need uprated ones! Just replace with standard! Quote Share this post Link to post Share on other sites
billinjah 0 Posted April 30, 2006 standard ones for me then!! Quote Share this post Link to post Share on other sites
W3RKD 0 Posted April 30, 2006 Yes unless you are building a very high revving engine a new set of standard one will be up to the job. Should you choose to go down the schrick route we can supply these also :wink: Quote Share this post Link to post Share on other sites
billinjah 0 Posted May 1, 2006 cheers guys i take it vag best for tensioner too? Quote Share this post Link to post Share on other sites
