Eibach anti roll bars, HELP NEEDED

[dazfxvw 0]

Hi all

 

I brought some eibach anti roll bars for my Golf G60 some time ago, but I never got around to fitting them.

 

Now that I have decided to 4X4 the G60 and won't be able to use the ARB's, I was wondering if I would be able to put them on the VR (Raddo).

 

What I need to know is, are the VR6 & G60 front arb's the same size length, shape etc (I know the VR's is thicker) and if they are would I be able to drill & tap a thred into the end of the roll bar, so that it can be mounted to a VR.

 

Any ideas?

 

DAZ

[PhatVR6 0]

no, the VR6 ones attach with a drop link bolted into the end. subrames are the smae shape though so it should fit that OK.

 

I guess you could cut them down and thread the end of the bar to accpet the link though.

[dazfxvw 0]

I was thinking that the VR's longer wishbones would counter the drop link problem, the mounting hole seem's further out than the golf's.

[Crasher 3]

No as PhatVR6 rightly says, the front bar will not fit as the link is bolted into the bar from below rather than slid over from above the wishbone.

[Supercharged 2]

Better off selling and getting the right ones really...