D90s

[BILLCOR 1]

What would the offsets be on 6Js and 8Js, and which adaptors would i need for the G60? Thickness wise that is?

cheers Bill

[BILLCOR 1]

THANKS ALL! :cry:

 

I have looked through the Porsche Rims thread but could find no reference to my question

 

Would 6s on the front be to narrow,would adaptors bring them out,I do not want to alter the arches in any way??????????????????????????????

[mrbeige 0]

No sure on the adapters, but I think 6J would be too small on the front

[Riley 0]

With the 8j either 20mm or 25mm are cool...if running 195/45's.

 

With the 6j you would be needing maybe 40mm? :shock: adapters (assuming they are the same et52 as the 8j)

 

Neil.

[BILLCOR 1]

Cheers Guys

 

Kinda thought 6s were a bit narrow :roll:

 

Back on the hunt :)

[BigTartanJudge 0]

Bill, need 7" on front and 8" on rear or ideally 8" all round, et will be 52.5 normally so would use 20mm or 25mm adapters. I can let you know a cheap source ofD90's for refurbing if you require, or there is alwyas sets going on here or more commonly, edition38.

[BILLCOR 1]

Bill, need 7" on front and 8" on rear or ideally 8" all round, et will be 52.5 normally so would use 20mm or 25mm adapters. I can let you know a cheap source ofD90's for refurbing if you require, or there is alwyas sets going on here or more commonly, edition38.

 

Cheers Struan, yeah theres a few sets about, just a case of sizes and i definaitly dont want to alter the arches,nice set on Ed38 but the rears are 9s :roll: Also another set but they"re white :roll:

i also like the Silver Roses,, have decided the RMs although 8 wide are to small being only 15s, bloody wheels :lol:

[Bendy 0]

Go for the 9's mate, think they would look rather tasty!! 6's if i remember correctly are et51 so you would need a huge adaptor to get them sitting right as riley said

[BILLCOR 1]

Go for the 9's mate, think they would look rather tasty!! 6's if i remember correctly are et51 so you would need a huge adaptor to get them sitting right as riley said

 

Would the 9s fit??? ie straight on with adaptors only??

[Bendy 0]

I would of thought so, im running 9's on mine that are a et20. im running coilovers and its quite close. herisites is running my old brock b2's and there a 9x16 et15 out back and from memory he is running just uprated 40mm drop suspension. so as long as you push them out far enough they will be fine. just aim for et15 out back if you do go for them

[BigTartanJudge 0]

9" will fit mae, no probs

[BILLCOR 1]

Cheers All :wink: