BBS RM Outer Dishes... where from?

[Nuggit 0]

Hey Guys,

 

As topic really, does anyone have any links on where I can get some?

 

Cheers!

[coolrado 0]

depends what you are after, you can get ally and stainless ones from Peter Hofmann who sells on ebay as rth2004

 

or just ally ones from Image Wheels although they no longer list them on their site and im not sure they are still doing them

 

or stainless from Justmatz but they are quite pricey

 

the ebay guy is the cheapest by far and i will be ordering a set of stainless 2" rims from him in the next couple of weeks.

[Yandards 0]

depends what you are after, you can get ally and stainless ones from Peter Hofmann who sells on ebay as rth2004

 

or just ally ones from Image Wheels although they no longer list them on their site and im not sure they are still doing them

 

or stainless from Justmatz but they are quite pricey

 

the ebay guy is the cheapest by far and i will be ordering a set of stainless 2" rims from him in the next couple of weeks.

 

But does anyone do them with a standard .5" dish?

[coolrado 0]

depends what you are after, you can get ally and stainless ones from Peter Hofmann who sells on ebay as rth2004

 

or just ally ones from Image Wheels although they no longer list them on their site and im not sure they are still doing them

 

or stainless from Justmatz but they are quite pricey

 

the ebay guy is the cheapest by far and i will be ordering a set of stainless 2" rims from him in the next couple of weeks.

 

But does anyone do them with a standard .5" dish?

 

as the 1/2" versions like the originals require the rim to double back on itself to retain the bead on the rim it would be much harder and more expensive to produce them so second hand 1/2" rims would probably be your best bet.

 

oh and i was quoted 570 euros including shipping to the uk for a set of 4 1.5" stainless rims from the guy on ebay.

[Nuggit 0]

Cheers mate...

 

That's exactly what I'm after as well, 1.5's ... just to make them look a bit more 'interesting'!

 

Steve

[coolrado 0]

Cheers mate...

 

That's exactly what I'm after as well, 1.5's ... just to make them look a bit more 'interesting'!

 

Steve

 

yeah i had thought about 2"all round or 2" on the back and 1.5" on the front but i cant seem to get a definate answer that they will fit with a good drop without arch work so i decided on 1.5" all round, i also dont really like the stretched look anyway.

[Nuggit 0]

I doubt if anyone'll spot the 1/2" difference anyway ;-)

 

Looking at mine, I think you're right though, I can't see an 8" with a standard-size tyre going under without problems, could be wrong, but my measurements say 'angle-grinder'...

[Furkz 0]

i would never ever ever ever buy image rims for RM's theyre impossible to clean and dont shine too well either!!! mine pitted it like a week too several hours to clean and still not true finish!

 

Justmatz are cool though

[Nuggit 0]

Furkz.. what are/were you running? (size-wise)

 

I've had an urge to go wider for some reason. It may be beer.

[Furkz 0]

8's and 9's on the RM's and 8's and 9.25 on the RS's

[Nuggit 0]

Furkz... how did you get on with clearances mate?

 

I fancy 8.5's and 7.5's...

[Furkz 0]

bit tight. Nuggit i like your sizes they will be perfect :)

[Nuggit 0]

Dammit, I hoped to be talked out of this :D

 

Soddit. I've got a bodyshop on side, we'll sort it.

 

This Corrado thing is addictive! A week on here, and I've ordered big rims, nearly a full respray, and in discussions for turbo kit.

 

God Dammit. lol

[Furkz 0]

make sure you get stainless, trust me