VR6 Front hubs onto a G60

[G60SC_Stoney 0]

as above, is it an easy swap to fit VR6 hubs onto a G60? really like the look of some 17" BBS RS and cant fit them due to being 5x120, and as the G60 is being pulled apart, wondered if VR6 hubs are a straight swap??

[Supercharged 2]

I think you just need VR6 outer CV's....

[Blue_Joe 0]

as above, is it an easy swap to fit VR6 hubs onto a G60? really like the look of some 17" BBS RS and cant fit them due to being 5x120, and as the G60 is being pulled apart, wondered if VR6 hubs are a straight swap??

 

Why can't you fit 5x120 with adapters???

 

VR6 Hubs wont fit them either as are 5x100!!!

[G60SC_Stoney 0]

VR6 Hubs wont fit them either as are 5x100!!!

 

cant get 4x100>5x120 adapters but you can get 5x100>5x120 adapters hence the need for VR6 hubs.

[flusted 0]

to fit the complete hub, you need wishbones, ball joints, and cv joints to go wide track which is 6mm wider.

[G60SC_Stoney 0]

and what about to do the rear?

[G60SC_Stoney 0]

and also are the hubs the same across the whole of the vr6 range ? i.e golf vr6 vento vr6 ? i know a mate who is breaking a vento, so can get some bits for nothing/not much.

[BigTartanJudge 0]

For rears you just need new rear discs, for fronts bit more involved but do-able and plenty donor cars breaking all the time for complete front 5-stud change.

[flusted 0]

and also are the hubs the same across the whole of the vr6 range ? i.e golf vr6 vento vr6 ? i know a mate who is breaking a vento, so can get some bits for nothing/not much.

 

When i did the 5stud conversion, i used vento parts.

Remembered you need to use the anti roll bar aswell

[G60SC_Stoney 0]

cheers guys, info much appreciated