ben16v 0 Posted February 22, 2007 see here right after searching the forum it looks like the best option for me to get my rear calipers replaced with mk4 and goodridge braided to get my 280mm on the front best is to go the whole hog and replace all the brake lines and flexies question is what diameter is the copper pipe required and how much do i need? and what size unions do i need? also a few peeps have said a £20ish flaring tool is good enough-true? TIA ben Quote Share this post Link to post Share on other sites
Crasher 3 Posted February 24, 2007 Use Kunifer 10 which is 3/16" or 4.75-mm if I remember well but if you go to a factors just ask for brake pipe and M10x1sw11 metric ends. Quote Share this post Link to post Share on other sites
ben16v 0 Posted February 25, 2007 Crasher, cheers mate, i was on the phone to roy? at your place the other day chatting about the mk4 conversion etc still ab it unsure what to do Quote Share this post Link to post Share on other sites
