Twiss 0 Posted June 19, 2007 Well My Mat ehas bought corrado and we have started to take out the interier to trace the stereo wires. but what i have found is a nightmare. looks like someone has bged astereo in and hasnt dona good job so i have removed as much of it as i can . but i have found that the main starting cables that go to the the starter switch have been cut and had a tail been put on and i can not find the oringnal iso plug or wireing for it. So I ask did the the early corrado not come withe loom for the stereo ? If it did or didn't any ideas where i could start as my mate wants a stereo in his car. Thanks Vaughn Quote Share this post Link to post Share on other sites
Twiss 0 Posted June 19, 2007 After finding the wiring layout on the forum.it looks like the orignal stereo loom is there but one thing is that the wires I have match the wires I should have for the speaker but not for the power cables. I have a red/WHITE, Brown, blue and a grey and blue cable for the power side of the loom can any one tell me what the blue and gray/blue wire do? Quote Share this post Link to post Share on other sites
Stan 24v 0 Posted June 19, 2007 Just trace them and then do a continuity check mate, you'll know if you have them from end to end then. Quote Share this post Link to post Share on other sites
PiercedWinky 0 Posted June 25, 2007 I just replaces all of mine with a decent stereo wire. It saved time and I know the wires were correct. Quote Share this post Link to post Share on other sites
