Fitting a bbm fuel rail

[uktarget 0]

Going to fit this this afternoon

 

I've just been looking at the standard set-up and it has the feed to the fpr a feed to the rail next to it and then a pipe coming off the other end and going to a sensor.

As you can see the bbm rail only has 2 pipes do i need anything else to fit or do i blank off disconnect a pipe/sensor

Going to be fitted with a bbm stage 3 chip and red-tops

[olly elworthy 0]

i beleive teh sensor screws into teh tapping in teh top of teh BBM rail,,

 

you can see it here..

 

[Blue_Joe 0]

Going to fit this this afternoon

 

I've just been looking at the standard set-up and it has the feed to the fpr a feed to the rail next to it and then a pipe coming off the other end and going to a sensor.

As you can see the bbm rail only has 2 pipes do i need anything else to fit or do i blank off disconnect a pipe/sensor

Going to be fitted with a bbm stage 3 chip and red-tops

 

The fuel return goes onto the XRP fitting, then you blank off the sensor!

[uktarget 0]

Cheers sam was getting a bit worried :lol:

While were here have you got a fitting piece for the induction pipe onto the standard charger

Cheers John