studentgti 0 Posted September 12, 2007 Hi Just starting to reassemble my Corrado after some reconstructive surgery (pics eventually!) and have realised that the screw holes attached to the top of the headlights have snapped on both sides. Don't really have the funds or the time to get new headlights at the moment, although I will eventually, but I was wondering if anyone had some ingenious bodges for getting them back securely in as a temporary measure? Cheers James Quote Share this post Link to post Share on other sites
coolrado 0 Posted September 12, 2007 if you use longer self tappers through the plastic gromets that the screws normally go into on the slam panel they will eventually screw into the headlight body, although the single screw behind the headlights should secure them enough on their own. Quote Share this post Link to post Share on other sites
Riley 0 Posted September 12, 2007 If there is enough of the plastic tab left...pop a hole in it and use tie wraps? Neil. Quote Share this post Link to post Share on other sites
