VR6_ROB 0 Posted September 24, 2007 hi all need some advice before i rip my engine apart i have a 2.9 vr6 engine in a mk2 its been in just over a month now when i drive steady the water level is great does not move but if i drive it hard its loosing water i cant see any leaks anywhere but i noticed the hoses go really hard full of pressure i been told it could be headgasket issue? the oil and water are not mixing so i was just wondering if it could be something stupid or if anyone has come across this help would be appreciated cheers rob Quote Share this post Link to post Share on other sites
Supercharged 2 Posted September 24, 2007 If the top hose it rock hard (you can't squeeze it) then could be head gasket... need to get the pressure read... Quote Share this post Link to post Share on other sites
VR6_ROB 0 Posted September 24, 2007 where do i get the pressure read any garage? , i cant squeeze the pipe Quote Share this post Link to post Share on other sites
mattkh 0 Posted September 25, 2007 Hi When was the plastic thermosat housing last changed. Quote Share this post Link to post Share on other sites
VR6_ROB 0 Posted September 25, 2007 it was changed few weeks ago but it was leaking before it happened when i changed the thermostat i took the old housing off and it was all cracked and split and they was no thermostat inside no wonder engine took ages to warm up no leaks coming from it now though Quote Share this post Link to post Share on other sites
jack 0 Posted September 26, 2007 Hi I had a similar problem with my VR6. I got a pressure check done and it turned out to be the radiator. I couldn't see the leak as the water was coming outas steam. Have a look at your radiator if you are using a coloured coolant (mines was pink) you will see traces of it on the mesh part of the radiator. Quote Share this post Link to post Share on other sites
mattkh 0 Posted September 26, 2007 Hi The other place is the auxilary electric water pump. Quote Share this post Link to post Share on other sites
VR6_ROB 0 Posted September 26, 2007 ill check the radiator ill put some coolant in see if i see anything i have changed the thermostat housing as it was cracked i also changed the auxilary electric water pump as it leaked from there before thanks for the help ill keep you updated Quote Share this post Link to post Share on other sites
Rob Heath 0 Posted September 27, 2007 If your thinkin it may possibly be the hg, go to a local garage and they can 'sniff' in your header tank to tell if the hg is gone Does it put alot of white smoke out the exhaust?? Quote Share this post Link to post Share on other sites
gogsboy 0 Posted September 28, 2007 If your thinkin it may possibly be the hg, go to a local garage and they can 'sniff' in your header tank to tell if the hg is gone Big if, surprise you how many garages don't have these testers, VW dealers dont and all others I called never had bar one. Quote Share this post Link to post Share on other sites
VR6_ROB 0 Posted October 7, 2007 hey all my samcos turned up last week fitted them yesterday and they is no more leaks and the pipes are not rock hard now i can squeeze them the car does not smoke only a little on a morning when its stone cold was fine this morning strange i thought just keeping a eye on the water now topped it up this morning as it had dropped a little but that was due to refillin it needed to get into the system Quote Share this post Link to post Share on other sites
12 DEG BEN 0 Posted October 7, 2007 I had a vr in a mk2 and the problem I discovered was the expansion tank I used was too small. It was round rather than a vr's which is more egg shaped. Didnt know that till later. Anyway when I used it hard the expansion tank would cough out water when I turned it off, Unknown to me and then I would check It later on the volume would be down. Sorted with a bigger tank. Also the hoses felt harder with a smaller tank. maybe more pressure caused by the small tank. Quote Share this post Link to post Share on other sites