`Sas 0 Posted October 13, 2007 Looking for a guide to setting the timing on the above? Changing the cylinder head in the near future due to a snapped timing belt and need to know how to set it up properly. All help welcome. Cheers Stevie Quote Share this post Link to post Share on other sites
Toad 0 Posted October 13, 2007 There is a mark for tdc on the bottom pulley, this lines up with a mark on the timing belt cover, there is also a mark on the flywheel I believe. and there is a mark on the cam pulley, on the outside at the top, and on the inside which lines up with the top of the head when the rockercover is off. Quote Share this post Link to post Share on other sites
easypops 8 Posted October 13, 2007 this may be of help....if it works :D Quote Share this post Link to post Share on other sites
`Sas 0 Posted October 15, 2007 Great info cheers. Head back on and torqued down, just got to try and remember where everything gets plugged in now. DOH Quote Share this post Link to post Share on other sites
