RIMnCHOP 0 Posted November 2, 2007 HELLO GUYS ive recently had the fan only working on 0 to 4. so ive searched around and found the thermal fuse probably most likely the problem. i got a wikki guide on how to do it so ive took off the trim to get to the blower housing. but the electrical conection is not on the front like the picture?? also it says to locate clip push down and turn clockwise to drop blower.well ive tried that and no luck the blower doesnt want to drop out of the housing??? any help or advice much apreciated. it is a 93 k plate with davia air con if that helps CHEERS RIMnCHOP :D Quote Share this post Link to post Share on other sites
Supercharged 2 Posted November 2, 2007 Ah - the air con blower is different I think... should be simple tho, get in there with a good torch and try and work out whats holding it... Quote Share this post Link to post Share on other sites
RIMnCHOP 0 Posted November 2, 2007 cheers mate will have a good luck now aslo i found a block conector under the seat with nothing in it :? . was wondering if this car had heated seats as there is a control unit were the heated seat controll shud be??? :? but it isnt the leather interiorr Quote Share this post Link to post Share on other sites
