El Mariachi 0 Posted November 20, 2003 I've some problems... started out when my radiator went bye bye After that my heaterradiator was leaking and spilling coolant inside my car and behind my dashboard (and through one of the blower holes) and now (2 months later) my entire blowing unit doesn't work. I checked the fuses... they "seem" fine... but I'm a n00b with fuses. Quote Share this post Link to post Share on other sites
del boy 0 Posted November 20, 2003 if you put rad weld in it then that is what is wrong because it chokes up the non return valve so you will have to get a new one thats what i did now its ok :lol: :lol: Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted November 20, 2003 check the thermal fuse or is it called the resistor pack,cant really remember but its located on the fan motor Quote Share this post Link to post Share on other sites
Henny 0 Posted November 20, 2003 Does the fan not work on any speed? If it only works on the fastest speed (4) then the thermal fuse has blown... The thermal fuse is part of the resistor pack and is there to make sure that you don't overheat the resistor pack and set the car on fire! It's only a few pence for a new fuse and it's quite easy to fix... 8) There's a thread around here that'll tell you how to fix that... If it just plain doesn't work at all, then I'd suggest taking the plug off the fan motor and checking for Voltage on it when the fans are on... If there's voltage, then the fan motor has died, if not then you've got a wiring problem... 8) If there's no voltage at all, then the next most likely (assuming that you've checked the fuse box for dead fuses! :roll: ) is the fan switch which are also known to give up... :? Good luck! Quote Share this post Link to post Share on other sites
Furkz 0 Posted November 20, 2003 http://website.lineone.net/~quigger/heater.htm this link saves me abt £70 hope it gets u going too Quote Share this post Link to post Share on other sites
