Top Front Suspension Mounts Need Changing

[Rocket Ron 1]

Hi

 

Just had my 1994 VR Serviced and been told that my top mounts are worn and need changing because its an MOT failure.

What OEM parts numbers do I need to change.

Also where can I get the special tool for the top nut or what else can I use instead.

[colinstubbs 0]

Don't know about the mount numbers, but in the past with a mates help I've used a socket extension + allen key bit, through a socket for the big nut,

 

while holding the socket with a big pair of molegrips. 8)

 

Craftsman's tools :lol: :lol:

 

Improvise, Adapt, Overcome!

[boost monkey 0]

7mm allen key or allen key bit, 22mm(iirc?) drop head ring spanner or drive-through socket and ratcher combo :salute:

[craigowl 0]

Had this done to VR6 in August last.

 

top mount 357412331A

top mount bearing 1J0412249

 

You need 2 of each cost about £36 including VAT and with 10% discount.

 

 

Labour at local garage (about £41/hour) - £123.38 incl VAT

 

Had "top mounts loose" for a couple of years on MOT advisory, but they never failed car on it.

 

IIRC some on here say this looseness is common and not a serious problem.

I did not notice any difference in driving car before and after - good either way!