perky15 0 Posted January 15, 2009 i have a corrado 2.0 16v i got a 2.5" exhaust from manifold back, de-cat, kr inlet cam, panel filter. what sort of power should i expect? is it worth putting it on rolling road? if so best one in south wales??? Quote Share this post Link to post Share on other sites
__Andy__ 0 Posted January 15, 2009 im sure ive heard rumours that you can get them up to 170bhp with a de-cat and kr cams... Quote Share this post Link to post Share on other sites
GlosterOx 0 Posted January 15, 2009 Hi Perky, My 148000 mile 2.0 16V has a 2.5" pipe from the cat back, Panel Filter + KR Inlet Cam and it made just over 157 BHP on the Stealth R/Road after a remap. Ian :D Quote Share this post Link to post Share on other sites
samthegram 10 Posted January 15, 2009 i am taking mine to stealth next week for a rolling road test. my spec is ; KR cams 4 branch, heat wrapped full stainless with decat k+n panel in airbox with cold air feed forged pistons, slight rebore 0.5mm lightened flywheel rebuilt head fingers crossed for bhp reading, i will post it up afterwards. Quote Share this post Link to post Share on other sites
horney 0 Posted January 15, 2009 i am taking mine to stealth next week for a rolling road test. my spec is ; KR cams 4 branch, heat wrapped full stainless with decat k+n panel in airbox with cold air feed forged pistons, slight rebore 0.5mm lightened flywheel rebilt head fingers crossed for bhp reading, i will post it up afterwards. You've got to be looking at 170+ with plenty of torque for that spec. I bet with the lightened flywheel it really picks up quick when you come on cam. nick Quote Share this post Link to post Share on other sites
corradophil 3 Posted January 15, 2009 Mine made 162 bhp and 152 Ibft with KR inlet cam, Magnex cat back exhaust, flowed head and manifolds by me. Quote Share this post Link to post Share on other sites
perky15 0 Posted January 16, 2009 any1 know of the closest rolling road to me that will set it up for me? south wales. Quote Share this post Link to post Share on other sites
samthegram 10 Posted January 22, 2009 i am taking mine to stealth next week for a rolling road test. my spec is ; KR cams 4 branch, heat wrapped full stainless with decat k+n panel in airbox with cold air feed forged pistons, slight rebore 0.5mm lightened flywheel rebilt head fingers crossed for bhp reading, i will post it up afterwards. You've got to be looking at 170+ with plenty of torque for that spec. I bet with the lightened flywheel it really picks up quick when you come on cam. nick It's making 165bhp with 146lb ft of torque, quite pleased with that :clap: with a stealth remap vince says it should push 170 :grin: Quote Share this post Link to post Share on other sites
Abdul 0 Posted February 3, 2009 Which manifold did u use mate? For some reason i thought that you couldn't get aftermarket mani's for the 16v rado's. Quote Share this post Link to post Share on other sites
samthegram 10 Posted February 3, 2009 don't know what make it is, i got it from ebay 2nd hand. it only just clears the bulkhead though. i think TSR and Ashley make one. Quote Share this post Link to post Share on other sites
