jackflash 0 Posted January 17, 2009 Where is the temperature sensor located that provides the external temp to the trip computer on a VR6? Quote Share this post Link to post Share on other sites
Jim 2 Posted January 17, 2009 It's located on the drivers side, right down behind the front bumper. It clips into a little hole at the back of all of the plastic trim up from the chin spoiler but then behind the black plastic bit in the bottom half of the bumper :) Quote Share this post Link to post Share on other sites
Supercharged 2 Posted January 17, 2009 ... or in the drivers brake cooling duct if fitted. Quote Share this post Link to post Share on other sites
jackflash 0 Posted January 17, 2009 Managed to find it (swinging around near the splitter!) but was wondering if this is the right replacement from GSF?: 93494A TEMP.SENSOR-2 PIN BLUE CO VR6 8/91 > 2 Pin Blue 7.25 Quote Share this post Link to post Share on other sites
JMC 0 Posted January 17, 2009 Managed to find it (swinging around near the splitter!) but was wondering if this is the right replacement from GSF?: 93494A TEMP.SENSOR-2 PIN BLUE CO VR6 8/91 > 2 Pin Blue 7.25 That sounds more like the coolant sensor to me... Quote Share this post Link to post Share on other sites
Yandards 0 Posted January 18, 2009 ... or in the drivers brake cooling duct if fitted. Not on a VR though. Quote Share this post Link to post Share on other sites
marf497 0 Posted January 18, 2009 Make sure the brown wire on the connector is connected to earth as I had this on my car and that fixed it VW charge about £20 for a new sensor. Quote Share this post Link to post Share on other sites
