HELP! Advice on fitting Brembo's to Corrado Brake Pipes?

[Jay2 0]

Just in case Junkie is on his hols, posted this up for some urgent advice. Car in pieces on my parents drive. Again. :(

 

Fitting some Brembo front calipers to my 91 G60 which were purchased from 'Junkie' on here, but hit a snag. :mad2:

 

Can't seem to mate the stainless braided hoses up, (which came with the calipers), to the copper brake lines on my C? :scratch:

2.8l 24v Climatronic system.pdfBrakeHoseConnector.JPG[/attachment:1gnt5auw]

BrakeHoseConnectorCloseUp.JPG[/attachment:1gnt5auw]

 

Non of the standard size male brake line connectors seem to fit the braided hose end? All too big, small or different thread. Anybody any ideas or what size I do need?

 

Any help appreciated as really need the motor back up and running. :notworthy:

[tim20vt 0]

this mite not help but the vw hard lines are 10x1 metric thread,ya can also get an imperial size close to this, maybee ya flexis are not metric.

 

my local autofactor makes hard lines and has all the fittings if you have some place close like that you could go try an imperial male fitting in ya hose.