Jump to content
Sign in to follow this  
Flexso

Removing Rear Number plate recess

Recommended Posts

there are single use clips on the back mate. not the best design in the world. Best bet is to source a new one or be as gentle as possible when removing it so not to break any of the little 'pegs' on the back of it. Then use these to fashion your own way to fix it back on.

 

May not seem clear but you will see what i mean when you have a look :)

Share this post


Link to post
Share on other sites
there are single use clips on the back mate. not the best design in the world. Best bet is to source a new one or be as gentle as possible when removing it so not to break any of the little 'pegs' on the back of it. Then use these to fashion your own way to fix it back on.

 

May not seem clear but you will see what i mean when you have a look :)

 

Thanks for the heads up. :D

Share this post


Link to post
Share on other sites

just taken mine off once you have removed plugs or screws you can gently pull it towards you then get a screwdriver and scrape away at the sticky stuff at the bottom it will slowly release itself as you are pulling it 8)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...