lewis1982 0 Posted August 20, 2010 My ABS light comes on but wont go off.... dont know if this has anything to do with it, but it started not long after fitting my coilovers. Anyone any ideas :confused4: Quote Share this post Link to post Share on other sites
Mawrick 0 Posted August 20, 2010 Maybe damaged one of the ABS sensors? - or maybe the wires going to them?. Quote Share this post Link to post Share on other sites
lewis1982 0 Posted August 20, 2010 any idea what the resistance of the sensors should be? and i will check that first Quote Share this post Link to post Share on other sites
Mawrick 0 Posted August 20, 2010 naa - really not sure if you could actually test it with resistance. I would take a physical look at them first - maybe it's dirt between the sensor and "wheel" also. If the wire have gotten "caught" by the new suspension it might even be ripped off. :) Quote Share this post Link to post Share on other sites
lewis1982 0 Posted August 20, 2010 thanks for the help, i will have a look when its not raining. Quote Share this post Link to post Share on other sites
Mawrick 0 Posted August 20, 2010 no probs - hopefully you will figure it out! :) Quote Share this post Link to post Share on other sites
JMC 0 Posted August 20, 2010 They can be tested for resistance (just been through this on mine) and it's very easy to do. Typically the sensors should be about 1100-1200 ohms. The front ones can be tested from in the engine bay (connectors are on top of each suspension strut). The rear ones the connectors should be under the rear seats. Quote Share this post Link to post Share on other sites
