rishisisodia 0 Posted January 23, 2011 i have an m reg corrado vr6 storm, fitted ddi dials yesterday. today when at a mates house his dad came in and said my headlights were on wen i went out they were off so i thought he might be loopy. however when i got home i realised he was telling the truth ang my lights wouldnt turn off. i have a hid kit fitted,, and yesterday i used the thick gray/yellow wire from the back of the headlight switch to power the ddi dials. any ideas? Quote Share this post Link to post Share on other sites
craigowl 0 Posted January 24, 2011 Corrado light switches can be very ropey components. On this forum, shorting has been known to set cars on fire such that they were totally burnt out and destroyed. A fix using an extra fuse is described here on the forum. Consequently, though I am no electrician, I would not think it wise to use a lead off the switch. Quote Share this post Link to post Share on other sites
rishisisodia 0 Posted January 24, 2011 i have fitted a fuse as shown in the how to sectio and my switch actualy broke, have used the one off my mk2 golf. i have a new switch but have not fitted it yet Quote Share this post Link to post Share on other sites
rishisisodia 0 Posted January 25, 2011 anyone? Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted January 25, 2011 Has it got an uprated headlight loom. Mine has and once found the headlights on. Turned out water had got into the relays. Failing that, how long have the DDI dials been done... could be something to do with that wire as you say. Quote Share this post Link to post Share on other sites
rishisisodia 0 Posted January 26, 2011 not got an uprated headlight loom, the ddi dials were done earlier that day. am thinkin of running them off the headunit ignition live instead, Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted January 26, 2011 Disconnect the DDIs and see if the lights sort themselves out. Quote Share this post Link to post Share on other sites
