mike33 0 Posted January 24, 2011 Just checked the forum and this has been discussed before but there was no answers to the problem. Basically my 89 valver was bought standard and everything was straight and true, since then i have replaced all the cv joints, wheel bearings (done at a garage) wishbones bushes, balljoints and lowered it on coilovers with 15 inch wheels. But today when i was tracking it up both the nearside wheels are 20mm further out than the offside (measured using a plumb bob from the arch to the middle of the hub).Ive checked the wheels and they are both straight and the same size, swapped them over anyway and no difference. Also checked for any play which there is none. The car has no signs of accident damaged anywhere and the wings are both early ones. Im totally lost any ideas? Quote Share this post Link to post Share on other sites
