Adam Darby 0 Posted February 27, 2004 does any body no roughly how much it is to gwt your head ported and polished. my car is a 1.8 16v cheers and has any body got any tuning tips whilest it is stripped down that far. cheers Quote Share this post Link to post Share on other sites
andycowuk 0 Posted February 27, 2004 race power motor sport quoted me £350 for a 16v head i think... Grant Motor Sport also have prices on their site. u dont need to get bigger valves put on the 16v head.....they are almost the optimum size as standard. HTH Quote Share this post Link to post Share on other sites
h100vw 0 Posted February 27, 2004 You could try a fella in Warrington. Portformance 01925 724278. Ian Birch has used him in the past if you think he needs any endorsing. Gavin Quote Share this post Link to post Share on other sites
g60bv 0 Posted March 7, 2004 i had race power motor sports in kent do my g60 head p&p 35m ex valves matched inlet and exhaust they do a lot of work for the magazine cars as well, good guys know their stuff and well priced, highly recommened. Quote Share this post Link to post Share on other sites
Henny 0 Posted March 7, 2004 i had race power motor sports in kent do my g60 head p&p 35m ex valves matched inlet and exhaust they do a lot of work for the magazine cars as well, good guys know their stuff and well priced, highly recommened. Yup, I'd recommend them too... My head was rebuilt/flowed there (both times... :roll: ) and my engine block/balancing work was done there as commissioned by John Mitchell (16VG60) 8) Quote Share this post Link to post Share on other sites
big_mac 0 Posted March 8, 2004 any prices henny? Quote Share this post Link to post Share on other sites
Henny 0 Posted March 8, 2004 any prices henny? You're best off PM'ing John (16Vg60) for prices... Quote Share this post Link to post Share on other sites
146 Jockey 0 Posted March 10, 2004 Got mine done by Keith in Race Power, well impressed and very very reasonable. Quote Share this post Link to post Share on other sites
flusted 0 Posted March 12, 2004 get your throttle bodie flowed while ther doin the head :D Quote Share this post Link to post Share on other sites
Henny 0 Posted March 12, 2004 get your throttle bodie flowed while ther doin the head :D Well, while the head is off, why not go whole hogg and do the inlet and exhaust manifolds as well as the throttle body... ;) I've had the lot done on mine, but they're sat on my garage floor at the moment so I can't say how much better they'll be yet! :roll: :oops: Quote Share this post Link to post Share on other sites
