Jump to content
VWVW

How do you remove this interior trims ?

Recommended Posts

I need to take my carpet out for a spot of cleaning. This is the only trim still holding the carpet in.

 

The two brass nuts holding the black port plug in place. I cant seem to get my spanner into the brass nut thats on the left hand side as its very restricted. The black port plug seems to be held very tight with limited movement. How do you go about releasing the nut ??? Anyone done this part of the trim removal before. Thought I will check before I break anything :)

 

cheers

Share this post


Link to post
Share on other sites

unclip the port - you need to press the back portion (iirc) with a flat blade screwdriver and loosen it. Have a look and it'll be clear. It wont loosen too much mind you as there is not much loom there. You'll then be able to get a socket or spanner on the nut.

Share this post


Link to post
Share on other sites

Cheers for the reply...Gave this another go still struggling with it. I did manage to get the spanner around the nut but there is no space to turn it with the gear leaver in the way. Probably will need a very small 10mm spanner for this.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...