StArRaDo 10 Posted December 31, 2011 Quick question guys. Wanna try replacing my DS Fender on my 90 G60 this weekend, wondering...do i have to take the front bumper off 2 do this? Quote Share this post Link to post Share on other sites
VR6 0 Posted December 31, 2011 Welcome to the forum :wave: Ok I'll go first and show my stupidity. Fender I get .... but what's the DS bit? Quote Share this post Link to post Share on other sites
Toohottotrot 10 Posted December 31, 2011 Driver side :) Quote Share this post Link to post Share on other sites
James. 9 Posted December 31, 2011 In effect yes. There's bolts just behind the bumper to remove. One at the bottom of the wing. The ones that run along the bonnet shut. One at the top inside the door opening and one on the inside of the wing (you'll need to take the inner arch out). There's a raft of seam sealant in there so take your time. Quite a time consuming job to get right. Nb: above is based on a 92 vr6 and 96 8valve, but would imagine it's pretty much the same. Might be time to buy the Bentley Corrado repair manual. It's invaluable. Quote Share this post Link to post Share on other sites
dragon green 5 Posted December 31, 2011 This may help http://www.corrado-club.ca/forum/viewtopic.php?t=14697 Quote Share this post Link to post Share on other sites
StArRaDo 10 Posted January 1, 2012 U guys rock, thanx very much for the time and input. BTW, HAPPY NEW YEAR! Quote Share this post Link to post Share on other sites
