G60 Co pot ohms reading for 68mm pulley and chip

[welshlad73 10]

Hi guys i need some advice on what is the best resistance reading on the Co pot when using a 68mm pulley and upgraded chip.

I'm still having trouble in getting a low Co reading on my G60.

I'm using a chip from MaxRPM.de and 68mm pulley.

Edited August 7, 2012 by welshlad73

[Banana Man 0]

anywhere between 600-850 for chipped ecu and 68mm pulley

 

Alternatively get a terra clean service done lowers co and hc levels dramatically ;) (shameless plug I know hehe)

[welshlad73 10]

Thanks i'll have another play with it tomorrow.

[owen g60 10]

I've done a couple of g60s recently

 

I went for 68 ohms between the 2 outside pins although mine still over fuels slightly

[wormy 0]

No idea if this helps, but here's the info on the co-pot from the VW self-study manual..

[welshlad73 10]

Thanks guys i'll keep you posted on my results

[welshlad73 10]

I tried all settings on the Co pot, got the emissions down to 2% but still have a flat spot when you put your foot down???