mike_303 0 Posted February 25, 2013 Only a quick one, Ive got a pulley and a jabba chip but was wondering if I need to run a shorter belt if I have the tensioner extension or if its one or the other? Cheers Quote Share this post Link to post Share on other sites
bradv8 10 Posted February 25, 2013 6PK1640 this is the belt you need as i was advised on another site n i have it on mine! type it in on ebay there only about £12 from gsf on there Quote Share this post Link to post Share on other sites
Riley 0 Posted February 26, 2013 (edited) Tensioner extension? Do you mean the modded adjustable ones from the likes of jabba? As long as the belt twists roughly 90deg then you are ok. Best with the shorter belt as above really, and if you do have an adjustable tensioner just tweak the tension until it feels right (90deg) Neil. Edited February 26, 2013 by Riley Spellingz Quote Share this post Link to post Share on other sites
mike_303 0 Posted February 26, 2013 Yeah like jabba do although mine is from bar-tek, so at the tensioner if im seeing a 90 degree turn? Quote Share this post Link to post Share on other sites
bradv8 10 Posted February 26, 2013 if u can twist the belt itself by 90 degrees n no more then the tension is perfect, any more n its to loose n less than 90 its to tight! hope this helps Quote Share this post Link to post Share on other sites
mike_303 0 Posted February 26, 2013 if u can twist the belt itself by 90 degrees n no more then the tension is perfect, any more n its to loose n less than 90 its to tight! hope this helps Ah gotcha, makes perfect sense to me now! cheers everyone. Quote Share this post Link to post Share on other sites
