VR doors on an '89 16V

[strimmer 0]

Are they the same, struggling to get a door locally but could get one from a VR.

[Jon_vr6 1]

Exterior wise they will be the same but vrs came with different elec window motors and different door cards. Could swap them over i suppose?

 

---------- Post added at 9:28 AM ---------- Previous post was at 9:27 AM ----------

 

Loom in door maybe different too

[strimmer 0]

Its for swapping on before respray, I can change over the electrics and door cards then. Good news because a VR has come up locally'ish just in time for respray in the next month or two.

[Jon_vr6 1]

Its for swapping on before respray, I can change over the electrics and door cards then. Good news because a VR has come up locally'ish just in time for respray in the next month or two.

 

As far as im aware it was only the front end (wings,bumper etc) that were different on early n late cars

[dragon green 4]

No difference on the exterior, there's a small bracket on the inside that's rivetted on,just drill rivets out (it's for the later doorcard) central locking pump and window motor are all the same