easypops 8 Posted May 31, 2013 I have a updated loom I bought years ago, but as usual never got round to fitting it. I think I got it from eBay, but could of been on here? I don't have any installation instructions but it looks fairly straightforward (famous last words) I have 4 questions 1. The 4 spade fittings go where? Are they connected to the 2 plugs behind the passenger side headlight? 2. There is a wire that seems spare at the drivers side plug, it seems to be the grey one , which the wiki says is the sidelight one? Does it plug into the sidelight? If so where is the passenger side equivilent? 3. What do I do with the original plugs? Just leave them loose? 4. Does the lead with the fuses go to the + side of battery? Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted May 31, 2013 1. Into the original headlight connector (in the matching colour wires) 2. Spare wire goes into the drivers side original connector (grey one) should be a spade connector 3. Leave loose or cover them up to protect from rain 4. Yes Quote Share this post Link to post Share on other sites
easypops 8 Posted June 1, 2013 Thank you mate, I was confused by the single grey wire :) Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted June 1, 2013 No worries mate when you feed the wire to drivers side i routed mine in front of the radiator (behind the front grille) so its away from any chance of the fans cutting into it. Also cable tie it in place Quote Share this post Link to post Share on other sites
