Jump to content
GTi.Si

Laserline alarm problem

Recommended Posts

Just picked up a VR6 earlier with a mate. The car was sat for 3 - 4 years with a battery connected which is now knackered. Put a new battery on but as soon as it is connected the alarm goes off and we can't stop it with fob. Have tried a new fob battery but it hasn't helped.

Is there anyway of resetting the alarm? Its a Laserline 996V2.

Share this post


Link to post
Share on other sites

Does it have a key to plug into the dashboard ? You should beable to disarm the alarm with it. Also check that the green light on the fog is working, might have a faulty fob. Mine came fitted with the same alarm and only one of my fobs works.

Share this post


Link to post
Share on other sites

Try pressing and holding the fob until the little light on it goes out. I have to do that on mine every once in while, like it needs resyncing or summat.

 

edit - mine's not a Laserline (It's the Scorpion) but it's still worth a go :)

Share this post


Link to post
Share on other sites

there should be a box in the engine bay passenger side near the windscreen black with green line round the middle. if you got an extra key with the car that's about 1 inch long you should be able to put it in the box to turn the alarm off and on and reset it.

Share this post


Link to post
Share on other sites

It has the siren in the bay, but no valet key slot. Also has a box behind the centre console but again no key slot. The internal battery is flat so going to leave it connected to see if i can get some charge into it.

Share this post


Link to post
Share on other sites

Yep have one of those, doesn't stop it either! Anyway think i've found the issue to be the internal battery is goosed. Have disconected the alarm for the time being, it'll either be reconnected at some point or a shiney new one fitted!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...