vcl 10 Posted March 2, 2014 I have just been changing the distributor cap on my 8v Corrado and am having a problem finding any means of locating the cap on the distributor body. Is it simply held in place by the springs, or is there some other guide that I have missed. cheers Quote Share this post Link to post Share on other sites
seanl82 23 Posted March 2, 2014 The cap should only fit on in one position iirc, so rotate it round until it sits right. The two spring clips can then be secured. Quote Share this post Link to post Share on other sites
vw rule 19 Posted March 2, 2014 Hello there, you should have a locator tab on the base of the distributor cap, this tab then fits into the recess or cut out on the top side of the distributor unit. Please see photo's below [ATTACH=CONFIG]77881[/ATTACH] Locating tab at the bottom of distributor cap = circled in black. [ATTACH=CONFIG]77882[/ATTACH] [ATTACH=CONFIG]77879[/ATTACH] Recess in the top side of the distributor = circled in black. [ATTACH=CONFIG]77880[/ATTACH] Hope this helps Si Quote Share this post Link to post Share on other sites
vcl 10 Posted March 3, 2014 Thanks for the help. Operation carried out successfully. vcl Quote Share this post Link to post Share on other sites