mmacneill123 0 Posted April 1, 2014 (edited) Hi folks, difficult to describe this without a picture (will try and add picture!!) but the breather pipe on the VR6 left side (where the belts are)that comes out of the metal hood at the top left and goes next to the throttle body (not the breathers on bulkhead side but the ones you see from the front) has an inline valve with a two pin plug on the top. Only problem is, mine is plastic - just a dummy!! As I am getting a small amount of oil forcing itself out when the engine is cold and dripping on to the hot exhaust and smelling (hopefully that will help pinpoint it too!) I assume it is a valve that is supposed to be open when cold, it would be good to know what it is and should there be a real one there!! Cheers Edited April 1, 2014 by mmacneill123 Extra detail Quote Share this post Link to post Share on other sites
n3p 3 Posted April 1, 2014 Meant to be like that if this is the one you're talking about: http://the-corrado.net/showthread.php?t=75654 Quote Share this post Link to post Share on other sites
mmacneill123 0 Posted April 1, 2014 Meant to be like that if this is the one you're talking about: http://the-corrado.net/showthread.php?t=75654 Yes, that was it!thanks for that, just looks like my clip is not tight enough! Quote Share this post Link to post Share on other sites
