g0ldf1ng3r 15 Posted January 26, 2017 This has also been happening for a while...... from the above i would say best to do as Jim said & whip out the passenger under trays & have a feel around your heater box from personal experience - if you do the matrix yourself, get some of the felt liner for the heater box flaps & reline it i didnt do the one in my valver & now need to pull the dash out again to do it Quote Share this post Link to post Share on other sites
VR-Sixy 0 Posted January 26, 2017 from the above i would say best to do as Jim said & whip out the passenger under trays & have a feel around your heater box from personal experience - if you do the matrix yourself, get some of the felt liner for the heater box flaps & reline it i didnt do the one in my valver & now need to pull the dash out again to do it I'll have a good ferret around at the weekend. If i don't find anything conclusive, i'm just going to bite the bullet and get the matrix replaced. Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted January 26, 2017 I'll have a good ferret around at the weekend. If i don't find anything conclusive, i'm just going to bite the bullet and get the matrix replaced. sounds like a plan :) just so as you know, stealth racing for example allocate 8-10 hours for a matrix replacement as such there is a big saving for a job which is achievable over a weekend Quote Share this post Link to post Share on other sites
VR-Sixy 0 Posted January 26, 2017 sounds like a plan :) just so as you know, stealth racing for example allocate 8-10 hours for a matrix replacement as such there is a big saving for a job which is achievable over a weekend My usual garage guys did the last one and this was back in 2006. Seem to recall the C was there for a couple of days so sounds about right. Or i could pay you two hundred sovs to do it......... :cool: Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted January 26, 2017 My usual garage guys did the last one and this was back in 2006. Seem to recall the C was there for a couple of days so sounds about right. Or i could pay you two hundred sovs to do it......... :cool: ha ha ha m8 if you were in the midlands i would have taken you up on that but unfortunately you are miles away lol Quote Share this post Link to post Share on other sites
Jim 2 Posted January 26, 2017 It's really not that hard. I did it, and I'm rubbish with the spanners. It's just daunting. Quote Share this post Link to post Share on other sites
VR-Sixy 0 Posted January 26, 2017 (edited) ha ha ha m8 if you were in the midlands i would have taken you up on that but unfortunately you are miles away lol I was serious!! Really.... prepared to over night at a hotel and help out if i can....... actually, maybe you're right. I'll get it done locally. Edited January 26, 2017 by VR-Sixy Quote Share this post Link to post Share on other sites
