Jump to content
Mark261288

Manual vr6 with 00281 fault

Recommended Posts

Hi, I've tired the searching on here but I Havnt come up with much of a answer. Im getting the fault code:

00281 - Vehicle speed sensor (G6 - 27-00 implausable signal on my manual 94 corrado and I'm not sure how to rectify it.

 

I read on here about a fix involving joining some wires but there wasn't any info on which wires etc.

 

Any advice would be great.

 

Thanks

Share this post


Link to post
Share on other sites

Yes it is all working as it should and the blue/white wire behind the stereo isn't plugged it. I'm going to have a look behind the fuse box tomorrow. It just winds me up that I've got a fault code I can't fix.

Share this post


Link to post
Share on other sites

Have you checked the sensor and wiring to the connector? It sits on top of the gearbox.

Share this post


Link to post
Share on other sites

I think fault lies between the sensor and the ECU, if everything else is working.

 

Like fla, said the sensor sits on top of the gearbox. I'll have look at the wiring diagram tomorrow for you. To see how it's it wired if I can find it.

Share this post


Link to post
Share on other sites

think its normally pin 1 from the speed sensor to the ecu pin 2 to speedo and pin 3earth is how most are wired.if the speedo is working them good as the sensor feeds both.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...