Cressa 44 Posted May 13, 2015 my abs light does not come on at all. I've removed the switch and found I have voltage at the 5pin connector, but the red 2 pin connector does not go into anything. I have a strange feeling something has been removed internally so it doesn't light up!! Does that sound reasonable? I have the switch apart and there is a circuit board with 5 pins and an led. What should that red 2 wire plug connect into?? Anything. And after reading lots, I need to borrow a vagcom reader. As a newbie I'm trying to make this non runner right. Any help greatly appreciated Quote Share this post Link to post Share on other sites
Cressa 44 Posted May 13, 2015 switch number 535 919 235 BA Quote Share this post Link to post Share on other sites
Cressa 44 Posted May 14, 2015 After finding and reading more write ups, one suggestion was that the lamp inside was blown. I've soldered a replacement and it only works!!! All be it is on all the time. Time to find the fault Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted May 14, 2015 The red connector i think was for the american market mate so there wont be any pins for it to connect to. Sounds like youve found the problem anyway now time to get it scanned on VAGcom Quote Share this post Link to post Share on other sites
Ray1965 10 Posted May 15, 2015 Glad you got the light sorted. You might find this useful for someone local to you who may be able to scan the car http://the-corrado.net/showthread.php?t=4948 Quote Share this post Link to post Share on other sites
