heaters.. Helppp

[2motion 10]

Hi there! I've recently brought a corrado :). Whilst being absolutely in love with the thing. I'm currently freezing my nadgers off. You guessed it, the heaters don't work. I've replaced the fan/motor with a new unit and changed the thermo fuse. Still no joy. Any ideas? Thanks in advance!

[Jon_vr6 1]

So the heaters dont work on 1,2,3 and 4?

[2motion 10]

Nothing at all mate

[g0ldf1ng3r 14]

does your heater blower fan work at all?

 

even with a non working blower motor you should still be getting warm air when the heater dial is set to warm - unless your matrix has gone & then you will only get cold air even if dial set to warm

 

if you have no response out of the blower motor it could be a blown fuse maybe - fuse board is under the drivers side footwell shelf

 

did the seller mention anything about hot air feed?

[2motion 10]

Yes mate I am getting warm air through after a while driving it does get quite cosy . But I'm getting nothing at all from the fan.

[g0ldf1ng3r 14]

Yes mate I am getting warm air through after a while driving it does get quite cosy . But I'm getting nothing at all from the fan.

 

ok that is a good sign - matrix is ok then :)

 

have you re-checked the thermo fuse connections since you put the new blower motor in?

 

could be the thermo fuse itself, the main fuse on the fuse board or possibly a break in the wiring going from heater speed dial to blower motor

[Dox 23]

If you put 12v to the fan does it run?

[2motion 10]

Not tried that yet. I'll recheck the thermo fuse and the fan. I've definitely got power to the plug for the resistor