massbad69 10 Posted January 28, 2016 Hi Wee question for you. I'm keeping my Speedlines with the standard tyres on my VR6 with lowered Bilstein B12 kit on it. What width spacers can I use front and rear to create a better look ? I've got 10s on the front and 20s on the rear of my daily mk7 GTD but I'm unsure re the Corrado. Thanks folks. Quote Share this post Link to post Share on other sites
seanl82 23 Posted January 28, 2016 Swap em onto the corrado and see what you think. I think 10-15mm will be the limit though without scrubbing on standard et43 wheel, with 10mm spacers bringing it to effectively et33. My RXs are et35 and are perfect imo, so 10mm should be good. Quote Share this post Link to post Share on other sites
massbad69 10 Posted January 29, 2016 Thanks for that. I was going to try the 5 X 112 spacers with a bolt holding them just to get a look and I didn't think I would be able to use more than 10s. Quote Share this post Link to post Share on other sites
seanl82 23 Posted January 29, 2016 You bring up a very good point (PCD) and one which I had overlooked! :lol: 1 Quote Share this post Link to post Share on other sites
massbad69 10 Posted January 29, 2016 You bring up a very good point (PCD) and one which I had overlooked! :lol: Lol I'm sure I will be able to get a good enough idea with it on with 1 bolt and hold it on the jack. Usually I would have went for s bigger wheel with no spacers but fancied refurbing the spare Speedlines grey with diamond cut rim. Quote Share this post Link to post Share on other sites
massbad69 10 Posted March 4, 2016 Need to buy these soon and I was thinking 15mm spacers all round but scared they rub ! Quote Share this post Link to post Share on other sites
kdub 10 Posted March 5, 2016 you can buy cheap spacers such as these http://www.halfords.com/motoring/car-accessories/wheel-trims-alloys?type=Spacer+Rings and work it properly for about 15-20 quid. Quote Share this post Link to post Share on other sites
