Jump to content
Sign in to follow this  
Robbo149

VR6 ISV part... what is it?

Recommended Posts

Hi guys,

 

fitted a new aux coolant pump at the weekend (and pretty chuffed I am too, my diy experience being pretty limited up to now). Anyway after I'd finished & was running the engine to check coolant level & for leaks etc, I was having a good old nosey around the engine & I noticed a hissing noise coming from the oval shaped black plastic thing connected to the ISV. It seemed to be coming from the joining piece which connects at a right angle to one the rubber hoses. Sorry for the lengthy description, I should have taken a pic! I looked it up on ETKA & it's just referred to as a 'damper'. What is it, what does it do, & should it be hissing?

 

Cheers,

Robbo

Share this post


Link to post
Share on other sites

it's asilencer for the ISV

it'll be cracked, common fault

 

bin it, and re route the pipes. so you have the offtake coming out of the intake boot into the end of the ISV. then the short 90 bend comoing out of the side of the ISV and into the inlet manifold.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...