Wing blowing fuse when coming down (rails are lubed just fine.)

[corrado33 10]

So the wing on my corrado is blowing fuse 16 when it's retracting. I've lubed the rails, and the wing moves extremely freely when I do it manually. It literally FALLS to the "down" position if it's disconnected from the motor. (Meaning I pulled the little handle out)

 

The motor is weird... with it disconnected from the spoiler, it'll spin in the "up" direction just fine. I can hear it. However, if I try to make it spin the other way (corresponding to "down") it bogs down and probably would stop if I didn't let go of the button.

 

Is this something I can fix? I find it weird the it works fine in one direction but not in the other. If I replace the fuse with the spoiler down, it'll move up when it hit 47, but when I slow down it'll move about half way down then blow the fuse.

 

Advice? Fixable? Or just replace the motor?

[dr_mat 0]

Is it the motor or the drive cables binding in one direction? I could imagine the issue being the cables more easily than the motor itself, but i didn't strip it down.

[corrado33 10]

Is it the motor or the drive cables binding in one direction? I could imagine the issue being the cables more easily than the motor itself, but i didn't strip it down.

 

It's the motor itself. The drive cables move freely as I can move them extremely easily by hand (by pulling the knob out and turning it.) I can move it with the lightest of touches with 2 fingers.