whiteee 0 Posted August 19, 2004 please can someone tell me wot each colour wire does on the wiring that plugs into the ignition switch? Quote Share this post Link to post Share on other sites
h100vw 0 Posted August 20, 2004 Thick red/black is the starter, thick red is the permanent 12v feed. thin black is ign live. I think the yellow/black is the feed to the relief relay/X contact. Gavin Quote Share this post Link to post Share on other sites
whiteee 0 Posted August 21, 2004 sweet... so a push button starter would be connected to the black and red/black? so it only works wen key is in ignition? if it was thick red n thick red/black then it wud b able to fire all the time (even tho fuel pump wudnt be engaged)? Quote Share this post Link to post Share on other sites
whiteee 0 Posted August 25, 2004 Anyone tried this? Does it at least sound correct in theory? Because the ignition live only becomes live when key is turned? So a switch (Sprung button type) that is connected to this and the starter motor would complete circuit when depressed? Is it that simple or have i missed something? Quote Share this post Link to post Share on other sites
h100vw 0 Posted August 26, 2004 That would do it. Gavin Quote Share this post Link to post Share on other sites
Guest Posted August 26, 2004 Andi has a push start mate Quote Share this post Link to post Share on other sites
Cougar 0 Posted November 1, 2004 Be careful not to let the push button ground out, mine did and I can't find what popped. No power to anything switched through the ignition now. Quote Share this post Link to post Share on other sites
billinjah 0 Posted November 1, 2004 cool iwas about to ask that question which kit did ya get ive got a s2000 button off an ebay guy i got one before they are lovely where are you putting your button in the c? Quote Share this post Link to post Share on other sites
Cougar 0 Posted November 2, 2004 I just bought a $3 USD momentary switch from the local parts store. CAUTION again, don't let that line short as it's not fused through the box. I still can't find why the line is not hot anymore so I ran a new line (fused) directly from the battery. My advise is do it with the battery disconnected and wrap the leads and contacts well. Quote Share this post Link to post Share on other sites
billinjah 0 Posted November 2, 2004 fitted mine took ages double checking every thing i know its a honda bit but the engine start writing lights up so my gf will be able to find it and its got a chrome ring cant beat a chrome ring can ya gorgeous it is!!! mine came with a relay are you fitting a relay with the button you brought? im not electrically minded but mine came with loadsa wires and a relay just wondered why yors blew? Quote Share this post Link to post Share on other sites
