Jump to content

4DUST

Members
  • Content Count

    74
  • Joined

  • Last visited

Posts posted by 4DUST


  1. Hi All,

     

    I have for sale Corrado VR6 Complete Fan housing inc Fans from my VR6. I have installed a short intake runner and supercharged it so the housing no longer fits on my car.

    It in good condition for its age and only has light surface rust along the housing edges - nothing deeper!. The inner plastic cowling parts have a couple of retaining pegs broken but could be glued / repaired without much hassle.

    These are getting very hard to come by as most have rotted through. Has been sitting in my dry garage for three years and has not been exposed to the massive amounts of salt we have had on our roads over the last few winters! This salt seems to be rotting our beloved rides!

     

    Need the space badly so NOW REDUCED TO £60 + £12 UPS 24-48h delivery. Am open to sensible offers. Weight is 5.6kg and feel free to sort out your own delivery if you like. Paypal payment as a gift please OR can be collected with cash from Bath .

     

    NOW SOLD


  2. Sorry Alan HI think it's worth the full price. I'm hopefully someone will have it off me.

     

    ---------- Post added at 4:13 PM ---------- Previous post was at 4:12 PM ----------

     

    Thanks Southie it's yours then. I will pm you with PayPal details. Cheers

     

    ---------- Post added at 4:16 PM ---------- Previous post was at 4:13 PM ----------

     

    Sold to Southie.

    Thanks for everyone's interest.

    Cheers,

    Will


  3. Following the fitting of a charge cooler and short runner inlet to my engine I have a good condition Bonrath Power Rohr for VR6 that's sitting in a box no longer needed. Looks great, has all the joiner hoses and fitted well on my Corrado VR6. Costs around £70-80 new.

    Wanting £30 including delivery if anyone is interested or £25 collected from Bath, Somerset.

    Cheers,

    Will 07747862800. [email protected]


  4. Hi,

    Corrado Standard Front Brake Pads - Brake Engineering UK - New Unused £12.50 Bargain!

     

    I have had these pads sitting in my garage for a while now and since my big brake upgrade have no use for them. They are a standard set of four pads for the front brakes and they are made by Brake Engineering which is a good reputable UK company. I have used there pads in the past and find the compound to be good and reliable. The company website is http://www.brake-eng.com/Products/Pads--Shoes/.

    It says on the box it fits VR6 so not sure about other models as I can remember if the calipers are different on the 16v's.

    Wanting £12.50 including delivery. Hopefully will be useful to someone. Can be collected from Bath, Somerset for £10 is anyone is near.

    Thanks,

    Will 07747862800

    [email protected]


  5. I have both the O/s drivers side and the N/S passenger side fog lights for sale. The fogs are a little dusty buy in fantastic condition with no chips or cracks. The adjusters, cables and everything else are all in great shape. I have included close up photos of the lenses to show the good condition. I am wanting £50 each including postage or £95 for the pair. Collection from Bath is also possible and I will knock a fiver off.

    Cheers,

    Will

    [email protected] 07747862800


  6. I have a VR6 cylinder head for sale that was fully rebuilt 8,000 ago. The head was skimmed a little and then tested, the valve seats were recut and valves checked and professionally re-laped in. It had new valve springs fitted along with new exhaust studs and nuts. New valve guides and valve seals were fitted. All parts were genuine VW bits and the job was not done on the cheap. I looked at all the receipts and it cost loads to rebuild. I bought the head as part of a complete engine and have split it as I only really wanted the 2.9 forged bottom end. I already have an EIP big valve head so this is surplus to requirements and I keep tripping over it on my garage floor which is a good motivator to sell!. The engine had been running smoothly when I bought it and had been looked after by former VAG tech. You can tell everything was sweet from the valve head colour on the cylinder head face. The head does not come with cams or tappets (although I think I may have some nearly new tappets if required that I could include) The engine was running OBD1 with coil pack.

    Wanting £100 for the head and would prefer collection due to weight of 22kg or delivery 1-3 days for £20.

    Cheers, Will

    Bath, Somerset

    [email protected]


  7. Most VR6's 1.8t's etc have 3bar and the 4bar is indeed a direct v easy fit replacement. Some corrados have 3 or 4 bar regulators installed. As emu says above for 2.8's 3bar and 2.9's 4bar as rule of thumb but sometimes not always the case. If a 3bar is fitted changing to a 4bat increases the fuel injector pressure and improves throttle response also making the mixture a little richer therefore releasing more power up the rev range. This is a very popular mod if you have a 3bar regulator.

    I am happy to send 1st class recorded delivery which insures up to £35 so no problem.

     

    ---------- Post added at 11:55 PM ---------- Previous post was at 11:48 PM ----------

     

    Best check which you have fitted first!

    Thanks,

    Will


  8. Fitted for VR6 injector testing then removed after three runs as decided to up-rate my injectors. Nearly new and only a couple of months old! This is a genuine VW part and costs new around £70 - 80. I am wanting £35 inc first class delivery for quick sale. Non genuine poor quality ones go for this sort of money so grab a bargain. Part number 0280160575

    Thanks for looking. Will

    [email protected] mob: 07747862800

×
×
  • Create New...