Steve16v

I have fitted a few too and it deffo isn't needed, just wire the gauge lights into the power supply to the heater control lights and you will be able to dim the gauge lights along with the dash lights

Gav & Nikki, thought you might like to see this..... got "Zehn" sorted out a bit Unfortunately my time has also come to pass it on to somebody else...

Found these in Hennys G60 thread..... a very nice way of showing people that you are stopping!! download/file.php?id=20142 download/file.php?id=34092

Take the passenger seat out as per the guide on the WIKI (5 min job max), and then it is just a matter of removing the sill trims and lifting the carpet enough to get the sound proofing to slide out..... it is going to be in a pretty rotten state and may tear apart.. so just be gentle with it.

Most likely the foliage cover.... there is a very good guide on how to change the seal in the WIKI.... pretty handy job..... once you have it done you are best off lifting the carpets, taking out the sound proofing and drying out the car and carpets

I would check the seal on the fan inlet under the scuttle panel first.... had to fix mine there a couple of weeks ago and the car is dry since..... well kinda.. I had to lift the passenger side carpet and dry out the foamy mats from under it

@ paul20v PM sent Bump... any members come across this sensor reading before and have any suggestions to what may be at fault?

I came across a post where another guy was having the same problem but there was nothing in the thread about a solution. Any ideas?

Did you ever get to the bottom of this Jon? I am having the same problem

Small problem but it has been niggling at me. The ambient temp reading on the MFA has been reading -40 Degrees C on the car since I got it. From reading other posts if the sensor is knackered or disconnected the Temp display should be bypassed when cycling through the displays on the MFA. I checked the sensor (I presume it is a thermistor) there on the weekend and its resistance changes when I blow hot air across it... so that would indicate to me that it is working. Am I looking at a short or a dodgy earth? Has this happened to anyone else? Cheers :)

Cheers mate, thanks for the info :)

Sound mate... cheers for that Were you happy with the colour match yourself?

Really impressed with these results... Did you send in a sample of your leather to the repair kit supplier so that they could match the colour for ye?

I would just buy the reflectors and try to pick up the left hand side case unit from here or ebay

ARZ tuning sell them. €90 a side I think http://www.arz-tuning.de/www/