Jump to content

jonnyboyo

Members
  • Content Count

    498
  • Joined

Posts posted by jonnyboyo


  1. Yeah it looks to uniformed to be a snapped piece. Is it manufactured like this do you know? I don't have another 3 bar grill to see if they're all like this.


  2. If you look at the second to bottom slat on the below picture and run your eye across the top, just to the left of the VW badge, the slat seems to have a bit 'missing' as it doesn't stay the same level all the way across. Best viewed if you zoom in. What I need to know is whether all the later type grills are the same, or has a bit been snapped off?

     

    77C7FE7E-DE07-4E24-9526-A39470C89D0D_zpswxh6d1uu.jpg

     

    Only reason is that I've sold it on eBay and the chap is now saying that his mechanic told him that piece is missing. I checked the grill thoroughly before packing it, and I didn't notice any damage, and that supposed missing piece didn't jump out at me.


  3. The passenger seat is in brilliant condition with no rips, burns or scuffs. The drivers seat has a 5p size mark in the base as can be seen in the photo. This didn't get any worse in the months I was using the seat due to it not being in a position you sit on. All the seats bolsters have their integrity, are in excellent condition and are nice and supportive. The heated seat elements are fully working in both seats and the airbags are present.

     

    Collection from Cardiff, South Wales, or I'm happy for you to arrange your own courier. They're already packaged up ready to ship.

     

    £80 ****SOLD****

     

    07584 771 011

     

    99E161ED-53CF-4274-AB12-66B5DC69A194-2268-00000355842D38F8_zpsc882ca74.jpg

     

    6263B2DB-3F19-424A-BCDA-0FA9253788FD-2268-0000035558EA4385_zpsb6a14942.jpg

     

    0E575AF8-B23A-4379-ADD6-F0B402AE70F3-2268-00000343473D4BDD_zps4b610693.jpg

     

    0E1FB526-F66E-4FF5-84F4-D19FB16ECF1C-2268-000003433EB258E5_zps298cbb08.jpg

     

    299AB8BE-3056-488C-8E35-F49FD4F3C61E-2268-000003417A4F1445_zps286d30cc.jpg


  4. Has anyone had experience with GSF's filters? Reason being i have on order the round black plastic cased filter that sits on top of the rocker cover on an 8v MK2 GTi. I think its a crank case breather. I mean, it wasn't cheap from GSF at £40, so i am hoping it is a German part or of good quality.


  5.   Walesy said:
    I used to use N&G motors in Splott,02920 461 661

     

    They're not the cheapest but their service is great and they're trustworthy etc. They're on Portmanmoor rd lane (behind the Fleurs pub)

     

    Are N&G VW specialists Walesy? I'm looking for someone in the know to diagnose my problem.


  6. I would buy a basic car without a service history such as a Mk1/2 GTI. At least with those engines the worst that can happen is that it needs a rebuild, and how much would that be for a basic 8v 4 pot? £1500 tops? To have the chains done on a VR i think you're looking at £800-ish just for that job, let alone if the pistons, rings, bearings etc are on their way out. I agree with what has been said above. A healthy stack of bills and receipts for quality work done is more desirable than a fully stamped up service book with no receipts to back the servicing up. Anyone can get a service book stamped up on the side.

     

    If the car is a lot cheaper than one with history, is in VERY good nick and you take an experienced mechanic with you, then the car could prove to be a steal if given a clean bill of health. And then if you keep it for a good few years you will have built up history of you're own with more than likely a few big service jobs thrown in too.


  7. I travel back up North regularly via the M4, M5 & M6, and at times i undertake. I know its not best practice and all that, but if i'm travelling at 70, 75 in the nearside lane, i would rather not then have to cross 2 lanes to overtake a 2nd lane hogger, to then cross back again over 2 lanes to where i was. Only to do the same again a few hundred yards down the road. I actually find sometimes that by undertaking the hogger they move into the nearside lane once you have gone past. Almost as though they had not realised they were hogging or travelling slower than the first lane.


  8. According to the owners manual, G60's should run happily on 95RON. Its the 1.8 valvers that need the higher octane. Of course using 97 and above will be beneficial to a G60. Is yours modded at all? If you're running more boost then that would explain the poo running on 95.

×
×
  • Create New...