philip walker
Members-
Content Count
12 -
Joined
Community Reputation
0 NeutralAbout philip walker
-
Rank
Newbie
Converted
-
Location
Pembrokeshire
Converted
-
Occupation
BBS importer, quattro fixer
-
philip walker started following G60 Alloys
-
Yep thanks spotted those. Very nice, however the wheels are needed for a part ex G60 I have in.
-
Looking for a set of the original G60 BBS alloys 191601025ae 6.5x16 ET33 4x100 pcd. Center caps not essential, just need to be free from buckles !! Please call during office hours 01437 563929 ask for me.....
-
Last few sets left. Please call for detaisl Philip 01437 563793
-
I have a few sets of genuine BBS CH 8.5x17 5x100 ET35mm New boxed locking bolts etc. Priced at £799.99 a set. Please call for details. Philip PW Motorsport Ltd 01437 563793
-
Yep, Sadly BBS have no more stock of the Silver 80mm RC badges part number 09.24.410. I sometimes get the odd set but not often. I may have a set coming up in the next week or so, call for details. Sorry about the yappin` I dont get out much.... Philip PW Motorsport Ltd 01437 563793
-
Thanks for the feedback and your support. Hope to assist in the future. I have the last remaining new set of the BBS RXII for stock arriving next week. 7.5x17 5x100 et35mm NEW Genuine BBS £1150 inc delivery (retail £400 per wheel) Please ring for details. Philip P W Motorsport Ltd 01437 563793
-
Thanks again Philip PW Motorsport Ltd 01437 563793
-
Thanks for the feedback chaps. Just ring if you need anything Philip 01437 563793
-
Thanks for the feedback.
-
Sounds as if you have a restricted flow to the heater matrix. Probably the valves fitted many years back as part of a recall. They are fitted inline on the pipes feeding and returning fron the heater box.
-
Split duration is when the valve timing is split not equally For example the timing may be 26/66/66/26 on say a fast road cam, some cam designers change the valve closing timing to say 26/64/68/26. This can have good effects on high torque cams.
-
The 264 Newman cam we sell should be a direct fit with no grinding as you suggests? The ideal duration for a G60/forced induction engine is 264 to 268 deg.