LucCorrado

No disagreement... The original connector became brittle.
Now you see the condenser, can you suggest where its value is mentioned?

Sent from my SM-G973U using Tapatalk

Where are you and what manual are you looking at. We only had ABV engines in the Corrado.  Mk3 golfs got the AAA

Attached pictures showing the location of the condenser and the applicable wiring diagram page from the Factory Repair manual. This is a VR6 1992.
The condenser is short circuited, and the surface label unreadable.

Sent from my SM-G973U using Tapatalk

Attached pictures showing the location of the condenser and the applicable wiring diagram page from the Factory Repair manual. This is a VR6 1992.
The condenser is short circuited, and the surface label unreadable.
Does that help?

Sent from my SM-G973U using Tapatalk

Hi Cressa,

I am in the US. Thank you for the precision for AAA in Mk3.

Can you suggest where I should route my question so I find the appropriate crowd?

Hi Dox.  I am aware of the RHD I lived in England way back. Yet I would think LDH or RDH ABS systems have similar design to handle unwelcomed wave hence the need for the condenser. 

 

Could you tell what condenser is used on LDH model?

On Page 201 of the Wiring Diagram for CORRADO starting in 1992 Engine Code AAA there is a reference C17.

It is a condenser present on each speed sensor negative wire.

Where is the VALUE of C17 given?  

Incidentally if someone knows its value that would help.

Thank you.

Looking for the rear water jet nozzle 535 955 985.

This part# includes a pipe and a cap.

I ONLY need the top portion or CAP of part reference number 22 in :

https://volkswagen.7zap.com/en/rdw/corrado/cor/1989-76/9/955-234000/

Thank you for the info. This part is out-of-stock. Will keep looking.

Sent from my SM-G973U using Tapatalk

My VIN# requires part# 3A0 955 435  as the CAP that re-directs the water jet from the rear wiper nozzle onto the inclined rear glass of a SLS 92.

I am looking for a new or used part available to buy.

Thank you.

In the rear cover for tunnel (535 864 263) there is a support for a bulb socket and there is also a blank insert in the rear ashtray (321 857 961) facing to that support.

 

Has there ever been a light installed there?

 

If so,

 

1- What are the part numbers for the bulb and its socket holder?

2- Which wiring diagram shows its connection to an electrical harness?

 

Thank you

Thank you for bringing same clarity to my request.

 

Got the stock as no one could confirm in time that 535 411 105 used for 2.9L in the UK is also applicable to the 2.8L SLC in the US.

 

Best.

Looking to replace a broken Front coil spring on a 2.8L VR6 SLC, 1992.

 

The color code on those in place are ONE GREEN and TWO BROWN paint marks.

 

The part number for this spec is 535 411 105A.

 

 

Incidentally, I will be curious to know the differences between those installed on a 2.9L and a 2.8L.

 

Thank you in advance.

Hello!

Looking for a vacuum pump that will work on a Corrado SLC VR6 1992. Mine is 1H6 907 325.

Thank you.

Thank you a bunch for the tip. Order is being processed. Best!

Looking for a pair of straps in good working conditions that hold the parcel cover to the hatch trim.

CORRADO SLC 1992.

I found one thank you.

 

Sent from my SM-G950U using Tapatalk

Hello,

 

Looking for part #13, to fit a 1992 SLC VR6 2.8ltr. My hose melted because it was NOT installed properly.

 

Here is a link to the part I am looking for:

 

http://www.jimellisvwparts.com/products/Volkswagen-VW/Connecting-hose/5123645/021133518B.html

 

Thank you.

I PM to purchase it.

 

Sent from my SM-G950U using Tapatalk

Thank you. Will have it checked. Will get back to you tomorrow. Pls hold it.

 

Sent from my SM-G950U using Tapatalk

Ok, I am interested. Just need to confirm if it is a E or J version of 535 837 205. Thank you.

 

Sent from my SM-G950U using Tapatalk

I have one for sale in the classified section.

 

Sent from my SM-J320FN using Tapatalk

 

I PM You. Still learning how to use this app. thanks.

 

Sent from my SM-G950U using Tapatalk

Looking for the Driver Side (left) Exterior Handle for 92 SLC, part # 535 837 205 E.

WTB Cross member 535 199 171 H.

 

Do you have one available?

WTB cross member with no rust or damage for a VR6. Is there one available?

Looking for the LEFT guide for a sliding steel sunroof with tilt.

 

The part is 1H0 898 015 A for a VR6.

 

Will take a whole assembly if available, not interested in motor.