jack-gtir

come on somone must have done somthing like this before ? :nuts:

when i say mapped i mean the carbs will be tuned and ignition mapped ( running O/E ECU for ignition)

asking on behalf of a freind hes totaly rebuild his 9a bottom end to (OE spec) head has been ported and polished ( nothing to extream middle of the road type thing) and stuck newman 288 cams in there and is also doing a bike carb conversion ( r1's i think ) 8) now and only now has he wondered whether or not this will work on standard bottom end ? or will he need to raise the C/R ? :shrug: i know only the dyno will really be able to tell but do you think this setup could breach the 200 bhp mark ? :shrug: ( will be mapped at bedrock scotland)

anyone had dealings with the likes of this http://cgi.ebay.co.uk/VW-MK2-GOLF-GTI-1 ... 518da7bbaa just wondering whether to steer clear or....? cheers - jack

stuartscales - stu 10 out of 10 transferd money and got the good less than 24 hours later along with great comunacation , top bloke to deal with , really dug me out of the sh** :notworthy: cheers again - jack

hey my spoiler will go up and down(slowly) with switch but not by itself .... :shrug: car is 1990 valver can anyone help cheers - jack

maybe the cam/distrabuter end seal ? :shrug: i know 16v's are bad for weaping there good luck hope you get it sorted - jack

peach !!! thank you very much :D

nothing wrong with after marcket filters mate ..... just stick to known makes and you will be fine :D

been looking for one myself any chance i could get a diagram sent over please ?

never mind a filter....leave her wide open for optimum flow :lol:

wireless internet and laptop works a treat .. is there a missing link there ? :D

as above what do i need to convert my double water pump pulley to single set up on my 16v ? ( VW told me the double pulley has now been discond and is no longer avalable :( ) part numbrs would be a huge help to thanks - jack

have the same problem with starting my 16v takes 4-5 turns before firing ....and untill recantly it was running fine when going so dont beleave it to be linked ......got to love the old rados eh ? :cuckoo:

yeh i heir what your saying about the wiring but i think thats going to be a long strung out job ....car has had 9 owners and i think everyone of them has cut spliced and taped up apart of the wiring ..... :( how do i reset my fuel mixture ? as this sounds promasing