Jump to content

darren16v

Members
  • Content Count

    17
  • Joined

Everything posted by darren16v

  1. darren16v

    poor idle

    is the isv where the throttle cable hooks up to? what should i look for?
  2. thinkin to sell my inpros now but the n/s rings dont light up anymore are they replaceable or not the problem?
  3. make sure no one is watching and lick the vents you will soon know if its steam by the horrible antifreeze taste you wont be able to get rid of.
  4. put a bit of wood between a jack and ur sump and jack away
  5. darren16v

    poor idle

    1.8 16v idles at 500 rpm sometimes less. some days it works fine any ideas
  6. darren16v

    borbet refurb

    got a set of 9x16 borbet a's in need of a refurb. quite fancy doin something different bt not sure what to do. any sujestions?
  7. i'm not worried about the oncomming traffic as long as i can see. jokes. did u say that the uprated loom makes the standard lights brighter. still need to get a loom as mines been butchered. where would i get 1?
  8. wheres the best place to get this uprated loom from? got inpros at the moment but i'm not really a fan. and the guy who had the car before me made a rotten job of the wiring and the full beam doesnt work. so im givin up on them and goin for hids in standard lights.
  9. go for the split tubing i would say. but tape the wires up every 6" before you put it on cause u always end up with stray wires poking out
  10. darren16v

    hot hot

    cool thanks for all ur help guys al let u know how i get on after an engine flush maybe im just bein too carefull
  11. you wont get a puddle when it sittin as theres no pressure in the system. unless its really big hole. if u cant get a pressure tester have a look when the engine is running hot and look then should be able to source it that way.
  12. darren16v

    hot hot

    what about a 2litre 16v out a mk3 one of my mates has a few of them pipins not a massive problem aslong as it can mount.
  13. darren16v

    hot hot

    i also wondered about puttin a vr rad. dunno if it fits the crossmember. suppose an engine flush wouldnt hurt either.
  14. darren16v

    hot hot

    as long as ive had it. about 4 months. there was a water pipe leakin when i bought it so ur rad weld theory could be right. think the guy i bought it from was a bit of a dodger it had just gotn an mot bt ive ound at least 6 mot failures without even lookin
  15. darren16v

    hot hot

    coolant temp is around 90 bt as i say am scared to let it idle for too long to see how hot it gets. i wondered if the filter head could be clogged thought about tryin some engine flush through it to see if it could clear it out
  16. darren16v

    hot hot

    sorry think i put this in the wrong place still tryin to get to grips with this forum thing. it has been at 120 when im idlin but it at 100 with the heating flat out when im driving at 60
  17. darren16v

    hot hot

    my 1.8 16v is runnin around 100 degrees of oil temp is this normal?
×
×
  • Create New...